distribuce - Slackware 10


uname -r

2.6.7 - ma v sobe zakompilovanu podporu sub->serial prevodniku pro dane USB zarizeni,
        kdyby to byl modul, jmenoval by se "pl2303", mel jsem to i jako modul ale se
	stejnym vysledkem, jak vidite dale,takze jsem to nakonec zakompiloval,
	protoze nemam moc v oblibe modularni jadra (btw: jako modul to pl2303 nesel
	obcas unloadnout pomoci `rmmod pl2303'). Podpora "usbserial" je take
	zakompilovana primo v jadre.


cat /var/log/messages | grep ... atd.

kernel: usb 2-1: new full speed USB device using address 3
kernel: usbserial 2-1:1.0: PL-2303 converter detected
kernel: usb 2-1: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)

Jak vidno, tak jadro ten USB kabel najde...


ls -la /dev/usb/ttyUSB0 # vytvoreno rucne (udev to nevytvori samo, nevim proc)

crw-rw-rw-  1 root root 188, 0 2005-01-05 13:07 /dev/usb/ttyUSB0

Spravne zarizeni zjevne existuje


lsusb -v

Bus 002 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x067b Prolific Technology, Inc.
  idProduct          0x2303 PL2303 Serial Port
  bcdDevice            2.02
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x000a  bytes 10 twice
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  bytes 64 once
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        bInterval               0

Z toho nejsem moc moudrej :-)


cat ~/.gnokiirc

[global]
port = /dev/usb/ttyUSB0
model = 5110
initlenght = default
connection = serial
[logging]
debug = on

Opsano nekde z internetu


:gnokii --version

GNOKII Version 0.6.4
Copyright (C) Hugh Blemings <hugh@blemings.org>, 1999, 2000
Copyright (C) Pavel Janik ml. <Pavel.Janik@suse.cz>, 1999, 2000
Copyright (C) Pavel Machek <pavel@ucw.cz>, 2001
Copyright (C) Pawel Kot <pkot@linuxnews.pl>, 2001-2004
Copyright (C) BORBELY Zoltan <bozo@andrews.hu>, 2002
gnokii is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
There is absolutely no warranty for gnokii.  See GPL for details.
Built 17:20:29 Jan  1 2005

Nejnovejsi STABLE gnokii :-)


gnokii --identify

GNOKII Version 0.6.4
LOG: debug mask is 0x1
phone instance config:
model: 5110
port_device: /dev/usb/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Serial device: opening device /dev/usb/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
Serial write: transmitter busy, waiting
Serial write: transmitter ready
SM_Block Retry - 0
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d
SM_Block Retry - 1
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d

Najde kabel, snazi se spojit s mobilem, ale ten neodpovida ci co???
A stale dokola to vypisuje to same .. co dal?
???